基于光滑粒子与有限元耦合算法的放射性废液运输容器跌落分析

黄岗; 孙胜; 童明炎; 汪海; 司丹丹

doi:10.11889/j.0253-3219.2016.hjs.39.010503

您当前的位置：

首页 >

文章列表页 >

基于光滑粒子与有限元耦合算法的放射性废液运输容器跌落分析

更新时间：2021-05-24

- 基于光滑粒子与有限元耦合算法的放射性废液运输容器跌落分析
- Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method
- 核技术 2016年39卷第1期文章编号：010503
- 作者机构：
  
  中国核动力研究设计院成都 610213
  Nuclear Power Institute of China, Chengdu 610213, China
- 作者简介：
  
  黄岗,男,1983年出生,2009年于华南理工大学获硕士学位,从事核设备设计及有限元分析研究
- 基金信息：
- DOI：10.11889/j.0253-3219.2016.hjs.39.010503
  中图分类号： TL93
- 收稿日期：2015-08-10，
  
  录用日期：2015-10-26，
  
  纸质出版日期：2016-01-25
- 稿件说明：
移动端阅览
黄岗, 孙胜, 童明炎, 等. 基于光滑粒子与有限元耦合算法的放射性废液运输容器跌落分析[J]. 核技术, 2016,39(1):010503

Gang HUANG, Sheng SUN, Mingyan TONG, et al. Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method[J]. Nuclear techniques, 2016, 39(1): 010503
黄岗, 孙胜, 童明炎, 等. 基于光滑粒子与有限元耦合算法的放射性废液运输容器跌落分析[J]. 核技术, 2016,39(1):010503 DOI： 10.11889/j.0253-3219.2016.hjs.39.010503.

Gang HUANG, Sheng SUN, Mingyan TONG, et al. Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method[J]. Nuclear techniques, 2016, 39(1): 010503 DOI： 10.11889/j.0253-3219.2016.hjs.39.010503.

摘要

基于光滑粒子和有限元耦合算法

利用显式动力学分析软件LS-DYNA

对装载放射性废液的车载式废树脂接收装置在三种不同跌落方式下的跌落冲击过程进行了数值分析。以装置水平跌落为典型算例

对其在跌落过程中所受的动态激励、装置的压力变化和装置的应力状态进行了分析。结果表明

光滑粒子和有限元耦合算法对于解决装载放射性废液的运输容器在跌落冲击过程中流固耦合问题是有效的。同时

基于有限元分析结果

提出了一种按照RCC-M《压水堆核岛机械设备设计和建造规则》等规范对放射性物质运输容器跌落冲击过程进行应力强度评定的方法

并依据该方法对装置的结构强度进行了评定

结果显示装置在三种不同跌落方式下的应力强度均满足要求。

Abstract

Background:

Dropping impact resistance property is a key characteristic for the transportation safety of transport container filled with radioactive liquid waste. Therefore

it is necessary to carry out dropping impact analysis of the transport container with the appropriate method during research and develop process.

Purpose:

Dropping impact analysis with appropriate method for the transport container filled with radioac

tive liquid waste was carried out to verify its dropping impact resistance property.

Methods:

Based on smoothed particle hydrodynamics method coupling with finite element method

dropping impact analysis of travelling spent resin incepting device filled with radioactive liquid waste in three different ways was carried out with LS-DYNA code which was an explicit dynamic analysis software. Besides

a stress strength assessment method for the device structure based on RCC-M and other rules was proposed

and the stress strength assessment was also performed with the method.

Results:

The dynamic excitation

the pressure variety and the stress of the device during dropping impact process were obtained in the paper.

Conclusion:

Smoothed particle hydrodynamics method coupling with finite element method is suitable for solving the fluid-structure interaction question during dropping impact process for the device filled with radioactive liquid waste. Furthermore

the strength of the device satisfies the requirement in three different ways of dropping.

关键词

Keywords

references

Fourey G , Oger G , Le Touzé D , . Violent fluid-structure interaction simulations using a coupled SPH/FEM method . IOP Conference Series: Materials Science and Engineering , 2010 . 10 ( 1 ): 012041 .

许庆新 , 沈荣瀛 . 充液容器跌落过程的SPH模拟方法 . 振动与冲击 , 2007 . 27 ( 6 ): 13 - 16 .

XU Qingxin , SHEN Rongying . Dropping emulation analysis of fluid-filled tank using SPH method . Noise and Vibration Control , 2007 . 27 ( 6 ): 13 - 16 .

Anghileri M , Castelletti L , Maurizio T . Fluid-structure interaction of water filled tank during the impact with the ground . International Journal of Impact Engineering , 2005 . 31 235 - 254 .

French Association for Design , Construction and In-Service Inspection Rules for Nuclear Island Components . RCC-M design and construction rules for mechanical components of PWR nuclear island . Paris, French: AFCEN , 2000 .

Monaghan J J . Smoothed particle hydrodynamics . Reports on Progress in Physics , 2005 . 68 1703 - 1759 .

Vignjevic R , De Vuyst T , Campbell J C . A friction-less contact algorithm for meshless methods . Computer Modeling in Engineering & Sciences , 2006 . 13 35 - 48 .

全国核能标准化技术委员会 . GB 11806-2004, 放射性物质安全运输规程 . 北京: 中国标准出版社 , 2004 .

National Nuclear Power Standardize Technical Committee . GB 11806-2004, Regulations for the safe transport of radioactive material . Beijing: China Standard Press , 2004 .

中国钢铁工业协会 . GB 24511-2009, 承压设备用不锈钢钢板及钢带 . 北京: 中国标准出版社 , 2009 .

Iron and Steel Industry Association of China . GB 24511-2009, Stainless steel plate, sheet and strip for pressure equipment . Beijing: China Standard Press , 2009 .

中国钢铁工业协会 . GB/T 1591-2008, 低合金高强度结构钢 . 北京: 中国标准出版社 , 2008 .

Iron and Steel Industry Association of China . GB/T 1591-2008, High strength low alloy structural steels . Beijing: China Standard Press , 2008 .

黄岗 , 孙胜 , 童明炎 , . 核电站用车载式废树脂接收装置研制 . 原子能科学技术 , 2014 . 48 ( 5 ): 939 - 943 .

HUANG Gang , SUN Sheng , TONG Mingyan , . Development of travelling spent resin incepting device used in nuclear power plant . Atomic Energy Science and Technology , 2014 . 48 ( 5 ): 939 - 943 .

李海龙 , 孙造占 , 孙树海 , . 放射性物质运输容器的跌落冲击分析方法 . 核技术 , 2013 . 36 ( 4 ): 040665 .

LI Hailong , SUN Zaozhan , SUN Shuhai , . Drop impact analysis method of radioactive material container . Nuclear Techniques , 2013 . 36 ( 4 ): 040665 .

江楠 . 压力容器分析设计法 . 北京: 化学工业出版社 , 2013 .

JIANG Nan . Analytical design method of pressure vessels . Beijing: Chemical Industry Press , 2013 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

失水事故引起反应堆堆内结构动响应分析的声学有限元方法

液态重金属冷却剂晃动响应特性研究