加速器驱动铅铋冷却自然循环次临界堆束流瞬变事故研究

汪 振; 王 刚; 辜峙钘; 柏云清; 龙鹏程

doi:10.11889/j.0253-3219.2015.hjs.38.010604

您当前的位置：

首页 >

文章列表页 >

加速器驱动铅铋冷却自然循环次临界堆束流瞬变事故研究

核能科学与工程 | 更新时间：2021-03-03

- 加速器驱动铅铋冷却自然循环次临界堆束流瞬变事故研究
- Beam transient accident for lead-bismuth cooled ADS by natural circulation
- 核技术 2015年38卷第1期文章编号：010604
- 作者机构：
  
  1. 中国科学院核能安全技术研究所中子输运理论与辐射安全重点实验室,合肥,230031
  2. 中国科学技术大学,合肥,230026
- 作者简介：
- 基金信息：
  
  中科院战略性先导科技专项(No.XDA03040000)和国家自然科学基金项目(No.91026004)资助()
- DOI：10.11889/j.0253-3219.2015.hjs.38.010604
  中图分类号：
- 纸质出版日期：2015-01-07
- 稿件说明：
移动端阅览
汪振, 王刚, 辜峙钘, 等. 加速器驱动铅铋冷却自然循环次临界堆束流瞬变事故研究[J]. 核技术, 2015,38(1):010604

WANG Zhen, WANG Gang, GU Zhixing, et al. Beam transient accident for lead-bismuth cooled ADS by natural circulation[J]. Nuclear techniques, 2015, 38(1): 010604
汪振, 王刚, 辜峙钘, 等. 加速器驱动铅铋冷却自然循环次临界堆束流瞬变事故研究[J]. 核技术, 2015,38(1):010604 DOI： 10.11889/j.0253-3219.2015.hjs.38.010604.

WANG Zhen, WANG Gang, GU Zhixing, et al. Beam transient accident for lead-bismuth cooled ADS by natural circulation[J]. Nuclear techniques, 2015, 38(1): 010604 DOI： 10.11889/j.0253-3219.2015.hjs.38.010604.

摘要

利用FDS团队(Fission & Fusion Design Study)开发的中子学与热工水力学耦合安全分析软件，对一种加速器驱动铅铋自然循环次临界反应堆的束流中断及束流超功率事故进行了模拟分析。计算结果表明：加速器驱动次临界洁净核能系统(Accelerator Driven Sub-critical System

ADS)次临界堆的功率对束流瞬变的响应几乎是瞬时的；事故工况下，自然循环会根据堆芯功率自动调整至重新达到稳定；失束时间越长，材料温度降得越低，功率瞬间恢复值越低，束流恢复后，材料温度回升的速度越快；束流200%超功率事故发生后堆芯功率最终稳定在初始功率值的192.2%，燃料温度增幅最大，为286K，燃料和包壳不会发生损坏和熔化，冷却剂不会发生沸腾。

Abstract

Background: Beam interruption and beam overpower are two typical transient accidents for accelerator-driven system. Purpose: To investigate the safety characteristics of the lead-bismuth cooled Accelerator Driven Sub-critical System (ADS) under beam transient accident

the steady state

beam trip and beam overpower accident of lead-bismuth cooled accelerator-driven system were simulated by using NTC-2D. Methods: NTC-2D is a two-dimensional version of neutronics and thermo-hydraulics coupled simulation program NTC developed by FDS team. Results: As for the beam interruptions

the temperature variations of cladding and fuel pellet at different time (1s

12s) were given. The longer the beam interruptions

the lower temperature of cladding and fuel. After beam overpower occurred

core power finally stabilized at 192.2% of the initial power value. The temperatures of the fuel

cladding and coolant were all smaller than the safety limits. The fuel and cladding would not melt and the coolant would not boil. Conclusion: The reactor was safe under two accidents. The transient response of the power for ADS under beam transient accidents is instantaneous. Delayed neutron has less effect on neutron generation time. Natural circulation can reach new steady under two accidents. Abstract

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

铅铋次临界堆XADS束流超功率事故研究