
浏览全部资源
扫码关注微信
1. 辽宁工程技术大学材料科学与工程学院
2. 大连理工大学三束材料改性教育部重点实验室
纸质出版日期:2012-07-01
移动端阅览
[1]李刚,赵云龙,郝胜智.LY12铝合金强流脉冲电子束表面改性层组织结构及性能[J].核技术,2012,35(07):507-511.
LI Gang1 ZHAO Yunlong1 HAO Shengzhi2 1. Micro-structure and property of LY12 Al alloy irradiated by high current pulsed electron beam[J]. Nuclear techniques, 2012, 35(7): 507-511.
用强流脉冲电子束对LY12铝合金表面进行辐照处理
结果表明
处理后合金表面出现熔坑
随辐照次数增加
熔坑数量减少但直径变大;XRD分析表明改性层中存在-Al和CuMgAl2和CuAl2相
重熔层再结晶有择优取向。表面截面硬度增大
在一定深度处达最大值
而后随电子束沉积能量减少而开始下降。电化学腐蚀试验表明
辐照处理样品的自腐蚀电位从–0.63 V提高到–0.52 V
自腐蚀电流由1.09 10 7A降低至3.12 10 9A
耐腐蚀性能明显提高。
LY12 aluminum alloy samples were modified by 3–25 times of high current pulse electron beam(HCPEB) treatment at 23.4 or 27 kV.The number of melting craters in the irradiated sample surface decreased with increasing number of the pulses
and the crater size increased with the pulse number.XRD analysis of the virgin sample showed the major phase of-Al and the secondary phases of CuMgAl2and CuAl2
which disappeared partly in XRD patterns of the samples treated with the HCPEB of certain pulses.The microstructure refinement and preferred orientation of crystal planes could be observed in the HCPEB treated samples
and the surface micro-hardness increased to a maximum in certain depths
where it began to decrease because of reduced energy deposition in greater depths.Test results showed that the irradiated samples exhibited a remarkable property enhancement against electrochemical corrosion
with the corrosion potential increased from 0.63 V to 0.52 V and the corrosion current decreased by 2 orders of magnitude.
0
浏览量
43
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621