Design and realization of the PLC based protection system for resonant power supply

Guanwen WANG; Jing ZHANG; Xin QI; Wenqing ZHANG; Jun LI; Qing ZHOU

doi:10.11889/j.0253-3219.2017.hjs.40.060401

您当前的位置：

首页 >

文章列表页 >

Design and realization of the PLC based protection system for resonant power supply

NUCLEAR ELECTRONICS AND INSTRUMENTATION | 更新时间：2021-05-19

- Design and realization of the PLC based protection system for resonant power supply
- NUCLEAR TECHNIQUES Vol. 40, Issue 6, Article number: 060401(2017)
- 作者机构：
  
  1.中国科学院高能物理研究所北京 100049
  2.中国科学院大学北京 100049
  3.中国科学院高能物理研究所东莞中子科学中心东莞 523803
- 作者简介：
- 基金信息：
- DOI：10.11889/j.0253-3219.2017.hjs.40.060401
  CLC： TL503.5
- Received：20 December 2016，
  
  Revised：17 March 2017，
  
  Published：10 June 2017
- 稿件说明：
移动端阅览
Guanwen WANG, Jing ZHANG, Xin QI, et al. Design and realization of the PLC based protection system for resonant power supply[J]. Nuclear techniques, 2017, 40(6): 060401
DOI：

Guanwen WANG, Jing ZHANG, Xin QI, et al. Design and realization of the PLC based protection system for resonant power supply[J]. Nuclear techniques, 2017, 40(6): 060401 DOI： 10.11889/j.0253-3219.2017.hjs.40.060401.

摘要

快循环同步加速器（Rapid Cycling Synchrotron，RCS）对谐振电源系统有严格的要求，本文介绍了一种以可编程逻辑控制器（Programmable Logic Controller，PLC）为核心的谐振网络保护系统的软件设计和实现，用于RCS电源系统负载网络。以PLC为核心，通过对相关数据的采集、调理、判断，实现对负载网络设备状态的实时监测，并及时、准确地将故障信息发送至相关电源。同时，通过对人机交互界面（Human Machine Interface，HMI）的开发，使系统具备状态显示、故障查询、系统复位等功能。针对系统要求，在保证系统可靠性的前提下，尽可能缩短保护系统响应时间。模拟测试结果表明，系统能够及时、准确处理故障状态，最大响应时间约16 ms，满足设计要求。

Abstract

Background

It is the first time using the rapid cycling synchrotron (RCS) of 25 Hz as the main accelerator for the China spallation neutron source (CSNS)

hence higher the performance of the power supply system for RCS

as well as the protection of the resonant network are requested.

Purpose

This study aims to reflect the status of the resonant network of RCS timely and accurately.

Methods

A programmable logic controller (PLC) is used as the kernel to handling the protection signals and a human machine interface (HMI) is implemented to display whole status of the resonant network. Finally

some simulation experiments are carried out to verify its performance and functionalities.

Results

Simulation tests showed that the protection system can reflect the status of the resonant network timely and accurately. And the total responsive time is about 16 ms.

Conclusion

The design of protection system for resonant power supply can satisfy the experimental requirements of RCS.

关键词

Keywords

references

J Wei , H S Chen , Y W Chen . China spallation neutron source:design, R & D, and outlook . Nuclear Instruments and Methods in Physics Research A:Accelerators, Spectrometers, Detectors and Associated Equipment , 2009 . 600 10 - 13 . https://www.researchgate.net/publication/223527757_China_Spallation_Neutron_Source_Design_RD_and_outlook .

Siemens Industry Online Support. SIMATIC S7-300 catalogue[DB/OL]. 2016-03-01. http://www.ad.siemens.com.cn/download/docMessage.aspx?ID=2012&loginID=&srno=&sendtime= http://www.ad.siemens.com.cn/download/docMessage.aspx?ID=2012&loginID=&srno=&sendtime= .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc和CPU 31x: 技术规范[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/12996906 http://support.automation.siemens.com/CN/view/zh/12996906 .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc and CPU 31x:manual[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/12996906 http://support.automation.siemens.com/CN/view/zh/12996906 .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc和CPU 31x: 安装[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/13008499 http://support.automation.siemens.com/CN/view/zh/13008499 .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc and CPU 31x:operating instructions[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/13008499 http://support.automation.siemens.com/CN/view/zh/13008499 .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc技术功能[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/12429336 http://support.automation.siemens.com/CN/view/zh/12429336 .

Siemens Industry Online Support. SIMATIC S7-300 CPU 31xc and CPU 31x:technological functions[DB/OL]. 2011-05-20. http://support.automation.siemens.com/CN/view/zh/12429336 http://support.automation.siemens.com/CN/view/zh/12429336 .

Siemens Industry Online Support. STEP 7 professional V13.0[DB/OL]. 2014-03-10. https://support.industry.siemens.com/cs/document/89515142/step-7-professional-v13-0?dti=0&lc=zh-CN https://support.industry.siemens.com/cs/document/89515142/step-7-professional-v13-0?dti=0&lc=zh-CN .

陈忠平 . 西门子s7-300/400系列PLC自学手册 , : 北京人民邮电出版社 , 2010 .

Zhongping CHEN . Siemens s7-300/400 series PLC self-study handbook , : Beijing Posts & Telecom Press , 2010 .

柴瑞娟 , 孙承志 , 孙书芳 . 西门子PLC高级培训教程 , : 北京人民邮电出版社 , 2009 .

Ruijuan CHAI , Chengzhi SUN , Shufang SUN . Siemens PLC advanced training tutorial , : Beijing Posts & Telecom Press , 2009 .

WEINVIEW. EasyBuilder Pro manual V4.00.01 2014.05[DB/OL]. 2016-05-03. http://www.weinview.cn/ServiceSupport/Download/Index.aspx?tid=100000007183811 http://www.weinview.cn/ServiceSupport/Download/Index.aspx?tid=100000007183811 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and implementation of wide range and high precision electron gun control system

Related Author

LIAO Yongqi

WANG Shengli

GUO Honglei

LI Deming

Related Institution

Shanghai Institute of Applied Physics, Chinese Academy of Sciences

AI问答

Address：2019 Jialuo Road, Jiading, Shanghai, China Postal code：201800
Tel：021-39194977 Email：LHB@sinap.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 沪ICP备05005479号-1 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：881268 Visits Today：795

⁰