Gang HUANG, Sheng SUN, Mingyan TONG, et al. Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method[J]. Nuclear techniques, 2016, 39(1): 010503
DOI:
Gang HUANG, Sheng SUN, Mingyan TONG, et al. Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method[J]. Nuclear techniques, 2016, 39(1): 010503 DOI: 10.11889/j.0253-3219.2016.hjs.39.010503.
Dropping analysis of radioactive liquid waste transport container based on finite element method coupling with smoothed particle hydrodynamics method
Dropping impact resistance property is a key characteristic for the transportation safety of transport container filled with radioactive liquid waste. Therefore
it is necessary to carry out dropping impact analysis of the transport container with the appropriate method during research and develop process.
Purpose:
2
Dropping impact analysis with appropriate method for the transport container filled with radioac
tive liquid waste was carried out to verify its dropping impact resistance property.
Methods:
2
Based on smoothed particle hydrodynamics method coupling with finite element method
dropping impact analysis of travelling spent resin incepting device filled with radioactive liquid waste in three different ways was carried out with LS-DYNA code which was an explicit dynamic analysis software. Besides
a stress strength assessment method for the device structure based on RCC-M and other rules was proposed
and the stress strength assessment was also performed with the method.
Results:
2
The dynamic excitation
the pressure variety and the stress of the device during dropping impact process were obtained in the paper.
Conclusion:
2
Smoothed particle hydrodynamics method coupling with finite element method is suitable for solving the fluid-structure interaction question during dropping impact process for the device filled with radioactive liquid waste. Furthermore
the strength of the device satisfies the requirement in three different ways of dropping.
关键词
Keywords
references
Fourey G , Oger G , Le Touzé D , . Violent fluid-structure interaction simulations using a coupled SPH/FEM method . IOP Conference Series: Materials Science and Engineering , 2010 . 10 ( 1 ): 012041 .
XU Qingxin , SHEN Rongying . Dropping emulation analysis of fluid-filled tank using SPH method . Noise and Vibration Control , 2007 . 27 ( 6 ): 13 - 16 .
Anghileri M , Castelletti L , Maurizio T . Fluid-structure interaction of water filled tank during the impact with the ground . International Journal of Impact Engineering , 2005 . 31 235 - 254 .
French Association for Design , Construction and In-Service Inspection Rules for Nuclear Island Components . RCC-M design and construction rules for mechanical components of PWR nuclear island . Paris, French: AFCEN , 2000 .
Vignjevic R , De Vuyst T , Campbell J C . A friction-less contact algorithm for meshless methods . Computer Modeling in Engineering & Sciences , 2006 . 13 35 - 48 .
National Nuclear Power Standardize Technical Committee . GB 11806-2004, Regulations for the safe transport of radioactive material . Beijing: China Standard Press , 2004 .
Iron and Steel Industry Association of China . GB 24511-2009, Stainless steel plate, sheet and strip for pressure equipment . Beijing: China Standard Press , 2009 .
HUANG Gang , SUN Sheng , TONG Mingyan , . Development of travelling spent resin incepting device used in nuclear power plant . Atomic Energy Science and Technology , 2014 . 48 ( 5 ): 939 - 943 .
LI Hailong , SUN Zaozhan , SUN Shuhai , . Drop impact analysis method of radioactive material container . Nuclear Techniques , 2013 . 36 ( 4 ): 040665 .
江 楠 . 压力容器分析设计法 . 北京: 化学工业出版社 , 2013 .
JIANG Nan . Analytical design method of pressure vessels . Beijing: Chemical Industry Press , 2013 .