3-D flow field analysis for fuel assembly spacer grids or spacer grids with fuel rods were carried out using hydromechanics software.For the spacer grids before and after modification
the calculated hydraulic properties and changes in flow field near the guide vanes were compared.The results show that the rationality of primary modification method for 300 MW fuel assemblies can be validated.
Experimental and theoretical study on the natural circulation characteristics of humid air in the fuel assembly of a full-scale pressurized water reactor
Geometric configuration of fuel assembly for small lightweight lead-bismuth reactor
Design and analysis of the spent fuel transfer basket for the reprocessing plant
Theoretical research on location of fuel assemblies failure using the activity ratio of134Cs and 137Cs
Telecentric PIV measurement of lateral flow in rod-bundle fuel assembly
Related Author
GU Hanyang
LIU Limin
WANG Xiaowen
NI Song
LIU Maolong
LI Leilei
ZHAO Pengcheng
WANG Chang
Related Institution
School of Nuclear Science and Engineering, Shanghai Jiao Tong University
Department of Mechanical Engineering, City University of Hong Kong
School of Nuclear Science and Technology, University of South China
Hunan Engineering & Technology Research Center for Virtual Nuclear Reactor, University of South China
Institute of Nuclear Energy Safety Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences