

浏览全部资源
扫码关注微信
中国工程物理研究院核物理与化学研究所
Published:01 June 2009
移动端阅览
[1]朱通华,刘荣,蒋励,温中伟,鹿心鑫,王玫,林菊芳,王大伦.裂变室镀层质量厚度的相对测量技术[J].核技术,2009,32(06):459-463.
ZHU Tonghua LIU Rong JIANG Li WEN Zhongwei LU Xinxin WANG Mei LIN Jufang WANG Dalun. Relative quantifying technique to measure mass of fission plate in a fission chamber[J]. Nuclear techniques, 2009, 32(6): 459-463.
[1]朱通华,刘荣,蒋励,温中伟,鹿心鑫,王玫,林菊芳,王大伦.裂变室镀层质量厚度的相对测量技术[J].核技术,2009,32(06):459-463. DOI:
ZHU Tonghua LIU Rong JIANG Li WEN Zhongwei LU Xinxin WANG Mei LIN Jufang WANG Dalun. Relative quantifying technique to measure mass of fission plate in a fission chamber[J]. Nuclear techniques, 2009, 32(6): 459-463. DOI:
基于在相同的中子辐照条件下
裂变数与裂变核素的数量成正比的原理
利用加速器14 MeV中子源研究了裂变室镀层重量的相对定量方法
介绍了实验布置及所获得的定量结果。将部分定量结果与其α定量结果进行比较
差异小于1%
证明该方法用于裂变室镀层重量的测定可行
定量结果的不确定度约为2%
4
%。
Under the same neutron radiation conditions
fission counts are proportional to the number of fission nuclei.Based on this concept
a relative quantifying method has been developed to measure the mass of fission plate in fission chamber on a 14 MeV accelerator neutron source at the Neutron Physics Laboratory
INPC
CAEP.The experimental assembly was introduced and mass of the fission material in several fission chambers was measured.The results by this method agree well(within 1%) with the α-quantifying method Therefore
it is absolutely feasible to quantify the fission plate mass in fission chambers.The measurement uncertainty is 2%~4%.
0
Views
20
下载量
2
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621