The HSS samples were implanted with 3×10`17cm-2 of 60keV C ions and (2-6) 10`17cm-2 of 102keV Co ions respectively
from a MEVVA ion source.The average beam flux was about 26.5 A. cm-2 The surface friction coefficient and hardness were measured
and wearing test was made. It was shown that the surface hardness of C
Co or C+Co implanted HSS increased from 15% to 50%
and the C+Co dual implanted surface of HSS was the hardest.The surface friction coefficient of HSS implanted with Co or C+Co ions decreased from 0.42 to 0.14. The wear resistance of the surface modified by C+Co dual implantation was better than that modified by C or Co single implantation. The surface of HSS implanted with Co ions had better lubricity
elasticity and tenacity. The C+Co dual implantation was one of the best methods to improve the surface wear resistance of HSS.
The effect of N ̄+ and Mo ̄+ implantation on hardness of Cr12MoV steel
The enhancement in wear resistance of W18Cr4V steel by ion implantation
Discrete element simulation of random packing structures in TMSR-SF
Effect on ZnO thin film photoluminescence after Ag ion implantation
Investigation of helium irradiation induced hardening in nickel-based alloy
Related Author
张涛
史维东
李国卿
Ping Zhou
Peiguang Xu
NIU Qiang
LIU Fengrui
WANG Naxiu
Related Institution
National Key Lab of Three Beam, Dalian University of Technology
Institute of Nuclear Science and Technology, Sichuan University
Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China) 2(Innovative Academies in TMSR Energy System, Chinese Academy of Sciences