

浏览全部资源
扫码关注微信
1.中国科学院近代物理研究所
2.中国纺织大学
Received:20 August 1988,
Published:1990-05
移动端阅览
Meizhen Wu, Guoqing Xiao, Shufen Wang, et al. Investigation of N+ implantation for GCr15 bearing steel[J]. Nuclear techniques, 1990, 13(5): 257-263.
本文研究了GCr15钢在100keVN
+
离子注入后耐磨性和硬度的变化,用AES、CEMS、XRD等方法对注入层进行了成分和物相分析。实验表明,注入层中的
ξ
-Fe
2
N及
ε
-Fe
2+x
(C
N)非磁性相能显著提高试样的耐磨性能。在实验条件下,有效改善GCr15钢耐磨性能的N
+
注入剂量应≥5×10
17
N
+
/cm
2
。
The variations of wearability and microhardness have been investigated for GCr15 steel after implantation with 100 keV N
+
. The composition and phases in the implanted layer were analyzed with AES
CEMS and XRD methods. The experimental results indicated that non-magnetic phases
ξ
-Fe
2
N and
ε
-Fe
2+x
(C
N) could essentiallly enhance the wearing resistance. To get a satisfactory wearing resistance
a dose of 5×10
17
N
+
/cm
2
is necessary.
G. Principi et al ., J. Mater. Sci. , 15 ( 1980 ), 2665 .
R. Frattini et al ., J, Mater. Sci. , 17 ( 1982 ), 1683 .
张桂林 等 , 核技术 ,( 1978 ), 1 : 23
C. Marest et al ., Nucl. Instr. Meth. , 209/210 ( 1983 ), 259 .
D. Firrao et al ., J. Mater. Sci. , 17 ( 1982 ), 1773 .
D.H. Jack et al ., Mater. Sci. Eng , 11 ( 1973 ), 1 .
N. Moncoffre et al ,, Nucl. Instr. Meth. , B15 ( 1986 ), 620 .
N. Moncoffre et al ., Nucl. Instr. Meth. , B7/8 ( 1985 ), 177 .
竺海量 , 金属材料基础 , 湖南科技出版社 , 1985 年, 第163页 。
0
Views
20
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621